New member.....

Post new topic   Reply to topic

View previous topic View next topic Go down

New member.....

Post  locksmith on Sun Feb 07, 2010 8:28 pm

Hello all. Just found this usefull forum , some good info and helpers...
I dont own a FB , but a James Flying Cadet amc 15t..I started restoring it a few years ago but ive not finished it yet due to divorce , house move and all the other related stuff..I plan to start work on it again within the next few months , it dont need much to finish it ..........
I will also be advertising some spares when i get the chance to have a good sort out, and ive got some N.O.S magneto's and flywheels plus a load of other stuff.......One last thing ...................anyone got any blue James tank badges ????????????????

locksmith

Posts: 3
Join date: 2010-02-07
Location: Worcestershire

View user profile

Back to top Go down

badges

Post  mcrmike on Sun Feb 07, 2010 10:46 pm

The small james badges are so rare now as to be almost unobtainable,if you were lucky enough to find one,let alone two,you could pay up to £50 each from a knowledgable dealer? I have just completed the restoration of my James cadet and have resorted to casting my own in epoxy and painting and polishing...not perfect by a long way but passable. See how you go, if you get stuck,I might dig out the mould.Best of luck with the AMC150,not the easiest to find bits for,Bantam John has the best stock of spares.P.S you wouldn't have a spare kickstart with good splines would you?

mcrmike

Posts: 51
Join date: 2009-01-10
Age: 56
Location: Loughborough, Leics

View user profile

Back to top Go down

Re: New member.....

Post  locksmith on Mon Feb 08, 2010 8:51 pm

I have the blue badges on the bike but the ones cracked....As for a kickstart i might have one , give me a week to go through my spares boxes and ill let you know........

locksmith

Posts: 3
Join date: 2010-02-07
Location: Worcestershire

View user profile

Back to top Go down

Re: New member.....

Post  locksmith on Sat Feb 13, 2010 11:59 am

Yes ive got a kickstart , its just the main arm without the swivel . Took my kickstart off to compare the splines and they look the same .I had it powdercoated with a load of other stuff in silver/grey so its in good condition . Will try and find a nut and bolt for it if you want it ..Can email you some pics if you wish .............Will PM you with cost etc if interested..........

locksmith

Posts: 3
Join date: 2010-02-07
Location: Worcestershire

View user profile

Back to top Go down

View previous topic View next topic Back to top


Permissions of this forum:
You can reply to topics in this forum